Saturday, January 18, 2014

The Figure Eight Central Opening of the Groasis Waterboxx

The Waterboxx took a great deal of time and money to design (seven years and over seven million dollars) and all aspects of it were carefully considered.  An interesting aspect of the the Waterboxx is the figure eight central opening.  This is shaped this way for several reasons, detailed below.

The Waterboxx is designed to work well enough to grow trees in the desert.  In a Sahara planting trial, 88% of single saplings planted with the Groasis Waterboxx survived.  This compared to only 10.5 percent of non-Waterboxx trees that were watered once weekly surviving.  While the 88% survival of the Waterboxx trees is great considering the very inhospitable conditions in the Sahara (no trees naturally grow there), the Waterboxx is a significant investment, especially when purchased in large quantities.  If the survival rate of trees using the Groasis Waterboxx was closer to 95%, the investment would have a much better return.   Mr. Pieter Hoff, the inventor, decided that the Waterboxx should have enough room to plant two small saplings in its center.  This allows natural selection to be used, allowing trees to compete for light and resources.  After one year, the stronger (meaning taller and healthier looking) of these two trees can be spared while the weaker is cut at the base.  In this way, the chance of one tree (out of two initially planted) surviving in the driest harshest conditions in the Sahara is now 99%.  The relevant math formula is (0.88+0.88)-(0.88*0.88) = 99%.

Secondly, the length of the central opening of the Waterboxx is meant to be oriented East-West.  This allows sunlight, originating in the East and traveling overhead toward the West, to reach the trees through most of the day.  The Waterboxx even has a compass rose imprinted on its lid to help with orienting it correctly.

The blue cap and lid overflow are to be placed on the north of the Waterboxx to maximize sun exposure (image courtesy of Groasis)

So the central opening of the Waterboxx allows two trees (or even one tree and one other annual plant as seen below) to be planted, with the stronger one surviving the first year.  It allows sunlight to reach the growing plants during most of the day, while the rest of the Groasis Waterboxx prevents the soil from drying out and weeds from competing directly with the Waterboxx plant.  Finally, the Waterboxx's narrow opening prevents wind from drying out the young plant during its first year critical period.

Once the Waterboxx planted tree has a growth spurt, after about one year, and its canopy becomes so large it may soon have trouble fitting through the central opening, the Waterboxx is removed and reused up to 9 more times.  The tree then has a mat or mulch placed around its base, and is drought resistant due to its deep, Waterboxx induced roots.

The Waterboxx is available for purchase from Dew Harvest in the United States. We would love to hear your comments below - to leave one, please click on "Comments".

The Lotus Leaf Inspired Waterboxx Lid

Plants have had hundreds of millions of years to acquire traits that are useful to them.  Most people are familiar with plants that can snap shut on insects (Venus' Flytrap or Dionaea musipula) in order to digest their bodies for nutrients.  The Toxicodendron genus, including poison oak, ivy and su mac, produce an extremely irritating oil that prevents the plant from being eaten (or easily removed).  Unknown to many lay people, however, is the incredible ability of the lotus leaf to rebuff water.

For much of the last half century, botanists have known that the lotus leaf exhibits very high water repellence, or superhydrophobicity.  This is useful to the plant because as water is slicked off the surface of the lotus leaves, dirt, bacteria, and algae are also washed off by this water.  This allows the lotus to prevent blockage of photosynthesis by dirt, and protects it against other parasitic organisms (the bacteria and algae).

Water sticks to most surfaces, but not the lotus leaf - From Ralf Pfeifer via Wikipedia 

The reason for this strong water repellence was elucidated by examining the surface of the lotus leaf at the microscopic level.  When looked at with an electron microscope by the botanist Wilhelm Barthlott, the lotus leaf was seen to have tiny pyramids or papillae.  These points minimize the contact the water has with the surface, preventing strong bonds from forming between the leaf and water droplet.  This is illustrated below.
Graphic by William Thielicke showing pyramidal structure of the surface of the Lotus leaf.  This surface guarantees that water won't stick to the surface of the lotus leaf, or the Groasis Waterboxx lid that has similar microscopic pyramids on its surface.  

As the water won't stick to the surface of the leaf, it slides off, taking substances and organisms harmful to the lotus with it.

A device which mimics this property was developed a few years ago for the planting of trees in very dry places.  Its designer knew that for as much rain and dew to be collected as possible, the lid or collecting dish would need to hold onto very little water, instead channeling it to the roots of a plant.  This device was called the Groasis Waterboxx.

When Pieter Hoff was designing the Groasis Waterboxx, he wanted to ensure that all possible condensation and rainwater that fell on the lid of his Waterboxx was channeled into the Waterboxx basin for later use by the plant.  He of course used a sloped, corrugated lid, made of polypropylene (a plastic known to be water repellent).  However, he also added pyramids to the surface of the lid at the microscopic level, mimicking the ingenious lotus effect.  All of these features meant that even a very thin layer of dew deposited each night could be saved and used by the growing plant.  The ability of the Groasis Waterboxx to propel water downward in shown in this video.

People assume the smoothest surfaces are the slickest, but this is not true when it comes to water.  Water cannot form strong bonds on the surface of the lotus leaf, and for the same reason it can't stick to the surface of the Waterboxx.

Here you see morning dew on the tomato leaves as well as the edge of the lid (which lacks the lotus leaf inspired pyramids) but none on the corrugated lotus leaf inspired lid - water that settled here and already been stored.
This lotus effect is even used by animals in very dry environments to drink the air.  The thorny devil in Australia as well as a group of beetles in the Namib Desert in southern Africa both collect dew on their bodies, and funnel it to their mouths to drink it.

The thorny devil's spikes aren't just for protection - they are also to collect dew and funnel it to his mouth.  Photo by Baras, public domain
You can use the insights garnered from nature that were used to design the Waterboxx to grow trees and many garden plants, tomatoes, eggplants, melons,cucumbers, squash, zucchini, peppers and others.  Visit our main website,, to learn about the Waterboxx or buy the Waterboxx here.

We would love to hear your comments below - to leave one, please click on "Comments".